Dji Ronin 2

Availablity: In stock

AED 1400 / Day


What's Included

 

S.No

Description

Qty

1.      

Ronin 2 Gimbal

1

2.      

Grip

1

3.      

Remote Controller

1

4.      

Intelligent battery

6

5.      

Battery mount

1

6.      

Battery charger

1

7.      

Quad charger hub

1

8.      

Battery power cable

1

9.      

Ronin 2 power hub

1

10.   

Camera top cross bar

1

11.   

Camera base plate

1

12.   

Accessory mount

1

13.   

15mm rod

2

14.   

15mm focus rod mount

1

15.   

Ronin 2 universal mount

1

16.   

Top mounting block

1

17.   

Motion block

1

18.   

Protective case

1

19.   

Arri alexa mini power cable

1

20.   

Arri Alexa mini Start/Stop cable

1

21.   

RED power cable

1

22.   

RED RCP control cable

1

23.   

Ronin 2 power cable

1

24.   

2-pin power cable

1

25.   

DC power cable

1

26.   

Rriple P-Tap breakout box

1

27.   

SDI Cable

2

28.   

USB Type-C Data Cable

1

29.   

UART rto D-Bus Cable

1

30.   

Hex Tool

1

31.   

Screw 

lot

The versatile Ronin 2 gimbal from DJI is suitable for use either handheld or mounted in a variety of ways including onto a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the ARRI ALEXA Mini or Sony FS7.

Like its predecessor, the Ronin 2 features support for underslung, upright, and briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between upright and underslung modes without changing the position of the camera. It also offers several other improvements, such as enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible.

Performance 
Upgraded high-torque motors allow the gimbal to support a wider range of cameras, resist high winds and G-forces caused when mounted onto a car, and keep it moving smoothly in flight.

Boosted Torque 
With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75 mph with camera builds as heavy as 30 pounds. Thanks to encoded motors and enhanced precision, the Ronin maintains the same 0.02° of accuracy of its predecessors.

Versatility 

Detachable Grip 
A detachable grip allows the Ronin 2 to stand up on its own, and is easily separated when the lower part of the handgrip is not needed. In addition to handheld work, the Ronin 2 supports mounting on cable cams, drones, Steadicams, vehicle mounts, and more.

Simplified Operation 

Easier Setup 
Making fine adjustments, which is essential for proper camera balancing, is now simplified with integrated adjustment knobs and a redesigned camera mounting base.

Integrated Screen 
A dedicated high-brightness touchscreen for settings and adjustments has been integrated into Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are placed easily within reach.

Assistant App 
The extensively refined, redesigned, and expanded Gimbal Assistant app helps create content with minimum effort via new features such as CamAnchor, Time-Lapse, and Panorama, providing a more intuitive and easier-to-use full control system for Ronin 2.

Intelligent 
Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features. Intelligent features include Panorama, Time-Lapse, and CamAnchor modes.

Powering 

Hot-Swap Batteries 
Two batteries on Ronin 2, and the ability to run with only one, allows for batteries to be charged and swapped without interrupting a shoot.

Accessory Support 
The Ronin power hub enables essential accessories such as DJI Focus and wireless video transmission systems to be powered by the Ronin 2 battery, as well as communicate with the gimbal controller.

Design 

Integrated GPS 
The built-in GPS provides Ronin 2 with essential information for gimbal acceleration and speed, which is crucial for maintaining the camera's position and the horizon level when moving at high speeds while mounted onto a vehicle or drone.

Robust Batteries 
Robust and resilient in extreme weather conditions, Ronin 2's self-heating batteries ensure stable power output for high-performance in temperatures as low as -4°F and high-heat environments. Dual batteries capable of operating simultaneously and independently provide complete redundancy, keeping the shoot going.

Compatible Cameras 
The Ronin 2 supports a range of cameras from DSLRs to cinema cameras, even with high-grade lenses and other accessories mounted. Compatible camera/lens configurations include:

RED DRAGON 

  • Angenieux Optimo Anamorphic 6-152 A-2S
  • ARRI Master Prime lenses up to 150mm
  • ARRI Master Anamorphic lens
  • Canon CN7x17 KAS S 17-120mm T2.95

ARRI ALEXA Mini 

  • Angenieux Optimo Anamorphic 56-152 A-2S
  • ARRI Master Prime lenses up to 150mm
  • ARRI Master Anamorphic lens
  • Canon CN7x17 KAS S 17-120mm T2.95

Blackmagic URSA Mini 

  • Angenieux Optimo Anamorphic 56-152 A-2S
  • ARRI Master Prime lenses up to 150mm
  • Fujinon ZK19-90mm T2.9
  • Canon CN7x17 KAS S 17-120mm T2.95

Canon C300 

  • Canon CN7x17 KAS S 17-120mm T2.95
  • Canon CN-E Prime lenses
  • Canon EF lenses up to 400mm
  • Zeiss Compact Zoom lenses

Sony FS7 

  • Sony CineAlta 4K lens series
  • E-Mount lenses
  • ARRI Ultra Prime lenses
  • A-Mount lenses up to 300mm f/2.8G II

Technical Specifications

 

Number of Axes

3-Axis (Pitch, Roll, Yaw)

Rotation Range

Yaw (Pan): 360°
Pitch (Tilt): 180° (-135 to 45°)
Roll: 90° (-45 to 45°)

Follow Speed

Pan: 400°/s
Tilt: 360°/s
Roll: 360°/s

Load Capacity

30 lb / 13.6 kg

Stabilization Accuracy

±0.02° (Motionless)

Anchor

 

Supported Camera Dimensions

W: 7.1 x H: 6.5 x D: 9.6" / W: 180 x H: 165 x D: 245 mm

Anchor

 

Ports

1 x D-Bus Input
1 x USB Type-C
4 x Proprietary (Power) Output
2 x Proprietary (Power) Output
1 x D-Tap (Power) Output

Wireless Frequency

2.4 GHz
5.8 GHz

Wireless Protocol

Bluetooth 4.0

Anchor

 

Capacity (mAh)

4280 mAh

Capacity (Wh)

97.58 Wh

Battery Runtime

2.5 to 8 Hours

Battery Chemistry

Lithium-Ion Polymer (LiPo)

Voltage

22.8 VDC

Anchor

 

Operating Temperature

-4 to 122°F / -20 to 50°C

General

 

Dimensions

24.8 x 16.4 x 28.3" / 630 x 416 x 720 mm (with Handlebar)
13.8 x 16.4 x 20.9" / 350 x 416 x 530 mm (without Handlebar)

Weight

12 lb / 5.5 kg (with Handlebar)
9 lb / 4.2 kg

Remote

 

Positioning

GPS

Anchor

 

Package Weight

65.7 lb

Box Dimensions (LxWxH)

33.0 x 24.0 x 13.0"